Achilles model LSI-290, 9'6", HIN ACH00060K112. Bought in 10/2012.
CSM (Hypalon) material. Light gray.
Use 1-part Shore Adhesive for gluing Hypalon. Use toluene (or toluol or xylol) to clean area before applying glue. Here are three different gluing instructions: One, Two, and Three.
The Achilles dinghy came with a Scoprega Bravo 9 foot pump. 6 liters/pump. Will pump up to 11.6 PSI.
Moeller (Tempo) part no. 620003, model no. ULTRA 3GAS, 3 gallon tank 9"x17"x10" (new 2021).
Fuel line primer bulb assembly — Tohatsu 3B7-70200-4.
Tempo tank connector part no. 240240, model 450TMF.
¼" NPT.
(Also, Tohatsu 37-9999800MA2, Moeller 033450-10, Scepter 05811)
Use Teflon tape on connector
threads. Tighten with wrench 1/4 turn past hand tight.
Aquasignal series 27 bicolor LED light on bow and all-around LED white light on pole clamped to stern. See Batteries – Dry Cell for the lights' battery requirements.
Nissan Outboard 8 HP NS8B S/N NS8B-73474 (3/1999).
I rebuilt the lower gear case in 2023.
Fuel mixture: 50:1
Gallons | Oil (oz.) |
---|---|
0.5 | 1.3 |
1.0 | 2.6 |
1.5 | 3.8 |
2.0 | 5.1 |
2.5 | 6.4 |
3.0 | 7.7 |
Spare parts list carried on Willow:
Description | Nissan Part No. | Price |
---|---|---|
Anode | 338-60218-2 | 7.99 |
Carburetor (idle jet bad) | 3B2-03200-1 | 152.78 |
Carburetor gasket | 369-02011-0 | 1.57 |
Diaphragm A | 369-03303-0 | 5.83 |
Diaphragm B | 369-03306-0 | 6.67 |
Float chamber O-ring | 369-03222-0 | 4.58 |
Fuel filter | 369-02230-0 | 9.99 |
Fuel tank connector | Tempo 450TMF, West 240240 | 12.00 |
Pump cover gasket | 369-03302-0 | 2.08 |
Parts manual | 19.00 | |
Prop, short shaft | 3B264-5170M | 74.99 |
Prop nut | 369-641210 | 6.67 |
Prop washer | 369-641240 | 3.17 |
Safety lanyard | 35306-8210M | 11.99 |
Spark plug (gap 0.035"-0.039", 1.00mm) | NGK BP7HS-10 Champion L82YC Autolite 4123 |
2.99 |
Water pump kit | 3B287-3220M | 32.50 |
Starter rope | 3B2050130M | 11.41 |
Starter handle | 3H6050190M | 6.35 |
Rope anchor | 3R1051310 | 4.34 |
Fuel pipe A | 98AB501000M | 10.32 |
Fuel pipe B | 3B2022120 | 4.02 |
To lower and raise the outboard, I tie a 2:1 block and tackle around the mizzen boom and attach the other end of the tackle to the outboard lift strap on top. The line is 5/16" double-braid and about 20' long.